FIRE DETECTION & ALARM SYSTEMS / IGN SERIES ADDRESSABLE

Intelligent Addressable Fire Alarm Control Panel
Bristol

SPECIFICATIONS

MODEL Series IGN-250
Standard EN54-2: 1997 + A1: 2006 & EN54-4: 1997 + A1: 2002 + A2: 2006
Maximum Loop 4 with Network Card, 6 Standalone
Input Voltage 240VAC +10%-15%, 50/60Hz
Input Current Consumption 1A
PSU Output to CIE 24.5 to 28.5 VDC
Batteries 2 x 12V / 24AH
Panel to panel communication Can Bus [loop]
Number of Panels 512
Interface Port USB, RS485, RS232 Serial, Ethernet
Memory [Non-Volatile] 1,000 Fire Events, 10,000 General Event
Zones 3,000 programmable
Total Group 3,000 programmable: Sounder=1,000/Common=2,000
Protocol/Addressing T&A, Value range from 1 to 254
Protection Built-in 4kV Surge protection
Power rating 16 to 24Vdc
Cabling 1.2Km Max Length / 2 x 1.5mm2 solid core Fire resistance
Programmable Relays 4 circuits: Normally Open/Close
Programmable Input 1 Circuit: Power limited 24Vdc
Programmable Auxiliary Power 19 t0 28 VDC (Note: Current Limited)
Fixed Outputs (FPE/Sounder) 2 Circuits: 18 t0 28 VDC (Note: Current Limited)
Indicator 24 LED Status/ 16 Zone Indicator
Display 7" TFT Touch Screen
Keypad 5 Brigade buttons and Programming Keypad
Material / Color Flat sheet Metal / with outer glass door, Orange stripe
Dimension Lx W x H 530 mm x 490 mm x 135 mm
Weight 16.70 Kg
Humidity 0 to 95% Relative Humidity, Non condensing
Intelligent Smoke Detector
Bristol

SPECIFICATIONS

MODEL IGN-7401
Standard EN54-7 :2000 +A1:2002 +A2:2006
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.6mA, Alarm: 4mA
Protocol/Addressing T&A, Value range from 1 to 254
Sensitivity As per stipulated standard
Indicator Single LED / 360 degree Visual
Material / Color ABS / White Glossy finishing
Dimension / Height Diameter 99.7 mm / 57 mm
Weight 145g (with Base), 90g (without Base)
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing
Intelligent Heat Detector
Bristol

SPECIFICATIONS

MODEL IGN-7402
Compliance EN54-5 :2000 +A1:2002
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.6mA, Alarm: 4mA
Protocol/Addressing T&A, Value range from 1 to 254
Heat Class Type A1R
Indicator Single LED / 360 degree Visual
Material / Color ABS / White Glossy finishing
Dimension / Height Diameter 99.7 mm / 57 mm
Weight 127g (with Base), 72g (without Base)
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing
Intelligent Multi-sensor
Bristol

SPECIFICATIONS

MODEL IGN-7403
Compliance EN54-29
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.6mA, Alarm: 4mA
Protocol/Addressing T&A, Value range from 1 to 254
Smoke Sensitivity As per stipulated standard
Heat Class Type A2R
Indicator Single LED / 360 degree Visual
Material / Color ABS / White Glossy finishing
Dimension / Height Diameter 99.7 mm / 57 mm
Weight 145g (with Base), 90g (without Base)
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing
Beam Detector
Bristol

SPECIFICATIONS

MODEL IGN-C7404
Compliance EN54-12:2002
Operating Voltage 20 V to 28 V DC
Current Parameters Standby:23mA Commission:56mA Alarm:33mA
Beam Sensor Sensitivity [via Encoder] Level 1: 2.6 dB High Sensitivity
Level 2: 3.8 dB Medium Sensitivity
Level 3: 5.8 dB Low Sensitivity
Beam Pathway Length [via Encoder] Span 1: 8 to 20 meters Short Path (1x mirror reflector required)
Span 2: 20 to 40 meters Short Path (1x mirror reflector required)
Span 3: 40 to 70 meters Normal Path (4x mirror reflector required)
Span 4: 70 to 100 meters Long Path (4x mirror reflector required)
Beam Path Angle ±0.5º Directional
Alignment Guide Laser Beam Pointer
Digital Display Guide Nixie Tube
LED Indicator Guide Red: Fire; Yellow: Fault; Green: Alignment
Reset Time Less than 2 Second (Power Cut)
Relay Capacity [Fire & Fault] Normally Open/ 2.0 A; 30 VDC
Material / Color ABS / White
Dimension / Weight L:190.87 x W:126.87 x H:91.96 mm / 440 gm
Weight 0.130 Kg with base
Accessories Mounting Bracket/ IGN-C7404R 4 x Mirror Reflector
Operating Temperature / Protection
Rating
-10°C to 55°C / IP30 [IP66 glue seal-For permanent fixing]
Humidity 0 to 95% Relative Humidity, Non condensing
Manual Call Point
Bristol

SPECIFICATIONS

MODEL IGN-8401
Compliance EN 54-11:2001 + A1:2005
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.6mA, Alarm: 1.8mA
Protocol/Addressing T&A, Value range from 1 to 254
Indicator Single LED / 360 degree Visual
Material / Color Fireproof ABS / RED Glossy finishing
Dimension / Height 89 mm x 93 mm x 35 mm
Weight 102g (with Base), 80g (without Base)
Class Type A, Indoors
Operating Temperature -10°C to +55°C
Humidity 0 to 95% Relative Humidity, Non condensing
Input/Output Module
Bristol

SPECIFICATIONS

MODEL IM-8412
Standard EN54-18:2005
Input Voltage Loop Power:24VDC [16V to 28V]; External PSU: 20 to 28VDC
Current Consumption Standby 0.6mA, Alarm: 1.6mA; External PSU: Standby 0.6mA, Alarm: 45mA
Protocol/Addressing T&A, Value range from 1 to 254
Input Relay Normally Open dry contact
Input Resistance 5.1Kohms/ ¼ W
Indicator Status Normal: Single blink/Active: Steady/Fault: Double Blink
Material / Color ABS / White Glossy finishing
Dimension 108 mm x 86 mm x38 mm
Weight 170g (with Base), 92g (without Base)
Operating Temperature -10°C to +50°C
Ingress Protection Rating IP30
Humidity 0 to 95% Relative Humidity, Non condensing
Short-Circuit Isolator Module
Bristol

SPECIFICATIONS

MODEL IM-8414
Standard EN54-17:2005
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.15mA, Alarm: 1.8Ma
Maximum Open Voltage (V SO MAX) 11V
Minimum Open Voltage (V SO MIN) 8V
Maximum Close Voltage (V SC MAX) 3V
Minimum Close Voltage (V SC MIN) 1.4V
Maximum Continuous Current (I C MAX) 500mA
Maximum Transient Output Current (I S MAX) 5mA
Maximum Leakage Current (I L MAX) 2mA
Max closed impedance (Z C MAX) 0.65ohms
Protocol/Addressing T&A
Number of monitored Max 70 Devices
Output Impedance 480 ohms
Indicator Status Indicator Status Normal: Single blink/Active: Steady-on
Material / Color ABS / White Glossy finishing
Dimension 108 mm x 86 mm x38 mm
Weight 152g (with Base), 81g (without Base)
Ingress Protection Rating IP30
Humidity 0 to 95% Relative Humidity, Noncondensing
Addressable Sounder Strobe
Bristol

SPECIFICATIONS

MODEL AVI-6401
Standard EN54-3:2001+A1:2002 + A2:2006
Input Voltage Loop Power: 24VDC [18V to 27.5V]
External PSU: 24 VDC [20V to 27.5V]
Typical Current Loop: Standby 0.6mA, Alarm: 1.5mA
External PSU: Standby 0.6mA, Alarm: 15mA
Saving Current Standby 1.2mA, Alarm: 9mA
Protocol/Addressing T&A, Value range from 1 to 254
Tones 17 Tones (refers to Manual)
Address Sequence Single Address: Evacuate tone
Dual Address: 1st Alert Tone / 2nd Evacuate tone
Strobe Light 10 Highlights LED
Material / Color ABS / Red Glossy finishing
Dimension Diameter 110 mm / 39.6 (with Base)
Weight 176g (with Base), 110g (Without Base)
Ingress Protection Rating IP21
Class Type A, Indoors
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Noncondensing
Loop Passive Repeater
Bristol

SPECIFICATIONS

MODEL IGN-5096
Standard EN 54-2: 1997+A1: 2006
Input Voltage Loop Power: 24VDC [16V to 28V]
External PSU: 24 VDC [20V to 28V]
Current Consumption Loop: Standby 1mA, Alarm: 1.2mA
External PSU: Standby 25mA, Alarm: 80mA
Memory Capacity Up to 300 fire event history
Number per loop Up to 254 units (ideal)
Material / Color ABS / White Glossy finishing
Dimension 180mm x 110 mm x44 mm
Weight 300g (with Base), 256g (without Base)
Operating Temperature 0°C to + 40°C
Humidity 0 to 95% Relative Humidity, Noncondensing
Handheld Programmer
Bristol

SPECIFICATIONS

MODEL 7096-0400
Battery Required 2X1.5 AA / Included
Current Consumption Standby 0μA, In-use: 3mA
Protocol T&A
Material / Color ABS / Grey Glossy finishing
Dimension 130 mm x 54 mm x28 mm
Relative Humidity 0 to 95% Relative Humidity, Non condensing
Power Supply Unit
Bristol

SPECIFICATIONS

MODEL 7096-0500
Standard EN 54-4
Power Supply Mains: AC220V(110-240V),50/60Hz, <130W
Backup 24VDC/12Ah sealed lead-acid battery (Not included)
Output Power 120W (24VDC/5A)
Protocol/Addressing T&A, Value range from 1 to 254
Mains and backup switching time No delay
Indicator Numerical Display
Material / Color Flat sheet Metal / Light Gray
Dimension 400mm x 320mm x 120mm
IP Grade IP30
Operating Environment Operating Environment
Temperature -10℃~+60℃
Relative Humidity ≤95%, non-condensing
Atmosphere 86~106KPa
Get a Quote / Need a Help ? Contact Us